Get strength without stiff operation
Opening measured
We assess dimensions and support before choosing the door set.
Hardware suited to use
We match locks, latches and closers to access and security needs.
Alignment checked
We test smooth travel, closing and hardware operation after fitting.
Choose steel for demanding commercial openings
A steel door is a practical choice where an opening faces frequent use, exposure, controlled access or higher physical security needs. We start by looking at where the door sits and what people need it to do. Internal or external position, weather exposure, usage frequency and access arrangements all influence the specification. We measure the opening and assess the supporting structure before selecting the frame, leaf and hardware. Locks, latches, closers and emergency-exit equipment can then be matched to the intended function. This measured approach helps you avoid a door that is robust on paper but poorly suited to the traffic, security or access demands of the building.
Fit the frame square and the leaf true
Successful steel door fitting depends heavily on the frame. We position and fix it accurately, then check that it remains plumb, level and square before setting up the leaf. Hinges and chosen hardware are installed to support smooth movement and dependable engagement with the latch or lock. Small alignment errors can cause rubbing, heavy operation and unreliable closing, so we test the full travel rather than judging the door while it stands open. Final functional checks cover the controls fitted to that opening, including any closer or exit device. You receive a properly adjusted installation suited to regular commercial use.
Frequently asked questions
Can you fit steel doors to external openings?
Yes. We install steel doors in suitable internal and external positions. Exposure, security, opening condition and intended use all need to be considered before the leaf, frame and hardware are specified.
What hardware can be fitted to a steel door?
Options can include locks, latches, closers and emergency-exit devices. We select compatible items according to the door's access, security and escape function rather than treating hardware as an afterthought.
Why does the frame alignment matter so much?
A frame that is out of square can make the leaf rub, bind or miss the latch. We check the frame position, fixing and leaf movement carefully, then test the fitted hardware across the complete opening cycle.